Meech Air Technology

Effectively Reducing Compressed Air Demands And Costs.

The Meech Air Technology Air Efficiency range is designed to reduce energy costs by entraining ambient air into the
compressed air flow, resulting in the use of less compressed air to achieve the same results.
In some cases compressed air demand can be reduced by 70%, which will save both energy and costs.

Energy Saving Safety Nozzle

Used as an alternative to open pipes.

  • Energy Saving – Air Nozzles can cut compressed air demand
    by up to 70% and reduce running costs
  •  Noise Reduction – Up to 30 dBA noise reduction
  • Innovative design – Offers Air Amplification at a ratio of 25:1
  •  No moving parts – No maintenance
  • Health and Safety – Nozzle design prevents dead-ending
    compliant
  • Easy to install – Unique nozzle design allows connection to
    either a ⅛” or ¼” BSP fitting
  •  Adjustable – Allows for application specific set-up
  •  Aluminium or Stainless Steel – Can be used in most environments
  •  Excellent performance – Thrust levels in excess of 250 grams, whilst air consumption is only 15cfm (425l/min)

Energy Saving Safety Blowgun

A hard wearing energy efficient replacement to a standard Blowgun

  • Energy Saving – Safety Blowguns can cut compressed air
    demand by up to 70% and reduce running
    costs
  •  Noise Reduction – Up to 30 dBA noise reduction compared to standard Blowgun
  •  Innovative design – Offers Air Amplification at a ratio of 25:1
  •  No moving parts – No maintenance
  •  Health and safety – Nozzle design prevents dead-ending
    compliant
  • Hard-wearing – Aluminium gun handle
  • Adjustable – Allows for application specific set up
  • Aluminium or Stainless Steel Nozzle – Can be used in most environments
  • Excellent performance – Thrust levels in excess of 250 grams, whilst air consumption is only 15cfm (425l/min)

Energy Saving High Thrust Jet

Used to provide a short powerful jet of energy efficient air.

  • Energy Saving – High Thrust Jets can cut compressed air
    demand by up to 70% and reduce running
    costs
  •  Noise Reduction – Up to 30 dBA noise reduction compared to an open pipe
  • No moving parts – No maintenance
  • Easy to install – The standard BSP thread will connect to
    most existing air supplies
  • Adjustable – Allows for application specific set up
  • Versatile – 4 different sizes makes them suitable for a
    wide variety of applications
  • Excellent performance – Thrust levels in excess of 450 grams, whilst air consumption is only 26cfm (736l/min)

Energy Saving Air Amplifier

Provides large airflows whilst consuming a minimal volume of compressed air.

  • Energy Saving – Air Amplifiers can cut compressed air
    demand by up to 70% and reduce running
    costs
  • Noise Reduction – Up to 30 dBA noise reduction compared to an open pipe
  • No moving parts – No maintenance
  • Easy to install – Standard fitting will connect to most existing air supplies
  • Adjustable – Allows for application specific set up
  • Available in Aluminium and Stainless Steel – Can be used in most environments
  • Versatile – 6 different sizes makes them suitable for a
    wide variety of applications
  • Excellent performance – Thrust levels in excess of 450 grams, whilst air consumption is only 26cfm (736l/min)

Energy Saving Air Curtain

Provides an efficient laminar sheet of air for applications over wide areas.

  • Energy Saving – Air Curtains can cut compressed air demand by up to 70% and reduce running costs
  • Noise Reduction – Up to 30 dBA noise reduction compared to a drilled pipe
  • Innovative design – Offers Air Amplification at a ratio of 25:1
  • No moving parts – No maintenance
  • Easy to install – The flange running the entire length can be
    drilled at any position, allowing for easy installation
  • Available in any length – Can be manufactured in any length between 50 and 2,500mm

Meech Air Technology Vortex Cooling Range

Effective Industrial Cooling

The Meech Air Technology Vortex Cooling range is designed to provide a cold air source for any number of
industrial applications.
Running solely on compressed air, Vortex Tube technology offers many advantages over traditional
cooling methods. In addition to the size and versatility they have no moving parts, require no electricity
and are maintenance free.

Vortex Tube

Designed for use in industrial applications.

  • Innovative design – Both hot and cold air can be as much as
    50°C above or below the compressed air temperature
  • No moving parts – No maintenance
  • Easy to install – The standard ¼” BSP fitting will connect
    to most existing air supplies
  • Adjustable – Different generators allow application
    specific set up
  • Manufactured in stainless steel – Hard wearing and suitable for many different environments
  • Available in 2 sizes – Small and medium Vortex Tubes are
    suitable for many different applications

Cabinet Cooler

Provides a cold air source that stops industrial cabinets/panels or enclosures overheating.

  • Innovative design – The small size allows installation into tight areas where space is an issue
  • No moving parts – No maintenance
  • Easy to install – Can be installed to any cabinet/panel wall,
    in any position
  • Adjustable – Comes with 4 generators (yellow, red,
    blue and brown) that will control the air volume and temperature
  • Manufactured in stainless steel – Hard wearing and suitable for use in many different environment
  • Safety features – Pressure relief valve to stop cabinet from
    over pressurising
  • Low noise – 73dBA with red generator at 80 psi (5.4
    Bar)
  • Cabinet Cooler System – Maximise efficiency
  • Prevents dust and ingress – Eliminates machine downtime
  • NEMA 4/12 and IP56 Rated

Coldsteam Air Gun

Provides a cold air source commonly used for spot cooling or cooling hard to reach areas.

  • Innovative design – Available in two sizes and the use of
    silencers reduces noise levels
  • No moving parts – No maintenance
  • Easy to install – Includes a strong magnet that will secure
    it to any ferromagnetic surface
  • Adjustable – Comes with 4 generators that will
    control the air volume and temperature (adjustable version also features a control valve used to adjust the cold fraction)
  • Manufactured in stainless steel – Hard wearing and suitable for use in many different environments
  • Low noise – 73dBA with red generator fitted at 80 psi
    (5.4 Bar)

Experimental Kit

Perfect for any application that requires a range of cooling.

  • Innovative design – Hot and cold air can be as much as
    50°C above or below the compressed air temperature
  • No moving parts – No maintenance and easy to install
  • Adjustable – 8 generators allow for application specific
    set up and a range of temperatures
  • Manufactured in stainless steel – Hard wearing and suitable for many different environments
  • Low noise – Cold-end silencer reduces compressed air
    noise
  • Two sizes – Small and medium, for use in a variety of
    applications

Needle Cooler

Perfect spot cooling for any small application.

  • Innovative design – Hot and cold air can be as much as
    50°C above or below the compressed air temperature
  • No moving parts – No maintenance
  • Easy to install – The standard fitting will connect to most
    existing air supplies and is supplied with a strong magnet
  • Adjustable – Supplied with two generators designed
    for use with a small vortex tube, high fraction (yellow) 8cfm generator and low fraction (green) 8cfm generator
  • Manufactured in stainless steel – Hard wearing and suitable for many different environments
  • Knuckle trunking – Allows cold air to be directed to hard to
    reach areas
  • Low noise – Hot-end silencer reduces compressed air
    noise

Small Vortex Tube

Designed for smaller, more delicate applications that require less air flow.

  • Innovative design – Provides both hot and cold air, which can be as much as 50°C above or below the air temperature
  • No moving parts – No maintenance
  • Easy to install – Standard 1/8” BSP fitting will connect to
    most existing air supplies. Small Vortex Tubes are also supplied with a standard 1/8” BSP to 6mm push fit adapter
  • Adjustable – Control valve allows temperature
    adjustment
  • Manufactured in stainless steel – Hard wearing and suitable for many different environments
  • Small – Specifically designed for smaller applications that require less air flow. Small Vortex Tubes will also have lower air consumption

Small Coldstream Gun

Designed for smaller, more delicate applications that require less air flow.

  • Innovative design – The use of silencers reduces noise levels meaning they can be used in most environments
  • No moving parts – No maintenance
  • Easy to install – Includes a strong magnet that will secure
    it to any ferromagnetic surface
  • Adjustable – Supplied with 2 generators (yellow and
    green) that will control the air volume and temperature (adjustable version also features a control valve used to adjust the cold fraction)
  • Manufactured in stainless steel – Hard wearing and suitable for use in many different environments
  • Low noise – Cold-end silencer reduces compressed air
    noise
  • Two sizes – Small and Medium
  • Knuckle trunking – Allows cold air to be directed to hard to
    reach areas

For more information on available products, please visit: https://meech.com/